OpenWrt

Topic: Kamikaze 8.09.1 Message: Thanks a lot to the whole OpenWrt team and congratulations on this new release!

Topic: Kamikaze 8.09.1 Message: Great, thank you!

Topic: Kamikaze 8.09.1 Message: The OpenWrt team would like to announce the release of Kamikaze 8.09.1The official binaries, generated from svn r16278, can be found here: http://downloads.openwrt.org/kamikaze/8.09.1/This is an update of the 8.09 ... [More] release, with the following notable changes: * broken mac80211 drivers removed, updated versions will be available in next release * fix port forwarding NAT issues in brcm-2.4 * use latest stable 2.6.25 & 2.6.26 linux kernels * include hostapd fixes * include madwifi updates & fixes * include sysupgrade enhancements & fixes * include udhcpc DHCP client enhancements * remove support for madwifi on 2.4 * enable multicast routing by default * switch rb532 to 2.6.23 * ADSL Annex-A firmware added to AR7 images * allow static routes without gateway in config * allow overriding of DNS servers assigned by DHCP * enable PXE-boot support in dnsmasq * add libnl-tiny & wprobe backported from trunk * include most ethernet drivers in x86 images * update LuCI to v0.8.7For a complete list of changes refer to https://dev.openwrt.org/milestone/Kamikaze%208.09.1Yours truly,--The new release management teamAndy Boyett & Nicolas Thill [Less]

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: There is any method to stop boot after mount the mtd to check the memory?Because i think the mtd is ok but is disaligned and the mount is corrupted

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: I am not so knowledgeable about this matter. So I have to learn it. Thanks for the post.simulation credit auto

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: Isaac702 wrote:Ok am I correct in assuming that the following error is the reason why the CRC of the firmware is being corrupted after the first restart."# ... [More] 0x00010100-0x000f0000 : "kernel"                                                                                                                                                                              # mtd: partition "kernel" doesn't start on an erase block boundary -- force read-only"From the information I have seen elsewhere about this error it is responsible for misaligning the image and so invalidating the CRC. I however have not found a way to fix it. Is there anyone that can help with this? Hello guys i would port Openwrt to a new Board (A modem of Fastweb Italian ISP).Openwrt boot and recognize the board and lot of hardware (wifi,usb ecc..) but at the first reboot the CRC is corrupted.In the bootlog i've the same error of Isaac702.There is any news?@Isaac702 if your board is bricked contact me to test any firmware in my board , if you want :)Bye ftp21 [Less]

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: Hi all,My work is using a TP-Link TD-8840 ADSL modem, which is based on the BCM6338 v1.0 board. The firmware it comes inserts iptables rules that can only be gotten ... [More] rid of manually, so we'd like to put OpenWRT on it. The boss has approved buying a second one and sending it to an OpenWRT developer - who should I contact to organise this? Code:# cat /proc/cpuinfo system type : 96338L-2M-8M cpu model : BCM6338 V1.0 [Less]

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: Unfortunately I had some bad luck with one of the flashes. So at the moment the unit is bricked.I should be able to fix it with a JTAG cable however unlike with the ... [More] serial cable I don't have the necessary parts to put one together.I also don't have the time to do so at the moment. I will probably give this another try in about 2 weeks.  Any help would still be appreciated however. [Less]

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: Got your message, Dan :)marc.

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: Marc & Florian:  I don't have your email addresses available as the main system which has them is currently hosed.  It froze in middle of a RAID reconstruction ... [More] (probably due to overheating), which apparently started during a backup.  So I've lost at lesat a few days work, and am currently on my test system for working on the GW6x00 boards.  Obviously I'm going to be trying to riscesitate the system as my first priority, but I'm out of commission for a least a day, possibly three (and hopefully not more). Waah!I am able to check my email messages, however.Isaac702: I just noticed your messages.  I'll look through them once I'm operational again and might be able to help (I've been working on imagetag stuff) [Less]