1
I Use This!
Inactive

News

Analyzed about 3 hours ago. based on code collected about 3 hours ago.
Posted over 15 years ago by David Touzeau
AlterMIME (http://pldaniels.com/altermime) alterMIME is a small program which is used to alter your mime-encoded mailpacks. it is used by artica-filter to insert disclaimers in your mails Altermime must be installed if you want to run "Add a ... [More] disclaimer on each outgoing messages". On the top menu, click on Software Install Click, on the tab messaging Go down and select "Install & Upgrade" button under the AlterMIME row [Less]
Posted over 15 years ago by David Touzeau
This feature is available with artica version 1.4.011320 If you are under this release you need to upgrade your Artica version.If this version is not released use the How to upgrade Artica to a nightly build ? It allow you to add disclaimers in ... [More] your outbound and/or Inbound mails using AlterMIME Open Source software. Activate artica-filter Click on Messaging on the left menu. Select Filters (Anti-Spam, anti...) tab Click on Modules Activation icon   Turn to green the Enable Artica Filter circle feature Click on the Edit button   Activate and set Disclaimer Click on Messaging on the left menu. Select Filters (Anti-Spam, anti...) tab Click on Disclaimer icon   Turn to green the Enable Disclaimer With AlterMIME. Select Parameters You can define if the disclaimer is added on each outgoing mails and/or each incoming mails by turning to green circles. If you want to organization's manager to personalize it's own disclaimers, turn on the Can be overwritten by Organization feature [Less]
Posted over 15 years ago by David Touzeau
This feature is available with artica version 1.4.011100 If you are under this release you need to upgrade your Artica version.If this version is not released use the How to upgrade Artica to a nightly build ? It allow you to display an interactive ... [More] map of concentric, segmented rings that help visualise disk usage on your computer. It is based on Philesight If you upgrade Artica, to this version you need to run setup-ubuntu or using these procedures : on debian; apt-get install libdb4.2-ruby1.8 libcairo-ruby1.8 On Fedora 10, use yum -y updateyum -y install ruby ruby-cairo ruby-bdb      On Centos yum -y updatecd /etc/yum.repos.d/wget http://centos.karan.org/kbsingh-CentOS-Extras.repowget http://ruby.gfd-dennou.org/products/rpm/RPMS/CentOS/CentOS-DennouRuby.repoyum -y --enablerepo=kbs-CentOS-Testing install ruby bitmap-fonts ruby-bdb ruby-cair On freshed install using the setup-* . It have already perform these operations. On the left menu, click on System Click on the System & Hardware tab Select Used Disk Space   2 windows are displayed. The first windows display map of concentric, segmented rings of your disk size. The second allows you to browse your disk and select wich graphic you wants to display.   When browsing using the second windows, use the "Used Disk space :" link to change the graphic.   [Less]
Posted over 15 years ago by David Touzeau
This feature is available with artica version 1.4.011015 If you are under this release you need to upgrade your Artica version.If this version is not released use the How to upgrade Artica to a nightly build ? it allow you to add routes in your ... [More] DHCP server. With this feature and in combination with the Interconnecter 2 sites distants avec OpenVPN + Artica feature you don't need to add routes information on each computer. When computer retreive it's IP address, it add automatically routes in it's network configuration On the left menu, click on "System" link Select "Network & NICs" tab Click on DHCP server On the DHCP Main panel, Click on the Left side on the Routing Information In DHCP icon You will be able to add the IP address (10.10.0.0 or 172.128.1.0 or 192.168.1.0), the netmask (255.255.0.0 or 255.255.255.0) and the Ip of the gateway the will route network packets. [Less]
Posted over 15 years ago by David Touzeau
This feature is available with artica version 1.4.010916 If you are under this release you need to upgrade your Artica version.If this version is not released use the How to upgrade Artica to a nightly build ? Creating a distribution list with ... [More] Artica will be construct in 4 steps. Enable the mailman service. Creating the user front-end Define roles and privileges. Create your distribution list. 1) Enable the mailman service. Go into Messaging/Routing and network, Click on the Mailing List Manager (Mailman) icon.   Turn to green the red circle in order to enable the Mailman service and click on Edit button. Administrator have 2 privileges : Enable or disable the service Delete the mailing list directly from the disk. 2) Create the user front-end The mailing management is an "user" operation trough the Artica end-user front-end. You need to create it see Add a nice end-user interface for your users 3) Create privileges for your users. Privileges are associated to a user's group that allow you to add several users able to add/delete Distributions list. Open your organisation and select Manage users and groups Select your group and click on the "Privilèges" icon Select the "Organization privileges" tab Turn to green the "Can manage email distribution lists" privilege   4) Create your distribution list. Connect trough the end-user interface. Not that these screen shots is in French but if your navigator is in English, the front-end will be switched automatically in English. Go into Messaging/ Manage Mailman Click on Add a new list   Put in the list name field the mailing list you wants to create. Set the host name of the web server in order to browse the Administration interface. Click on Add button     The main list will be refresh and your new mailing list is added. Click on the list, It will show you how to access to your mailing list settings front-end interface. (If you cannot display the front-end interface this is because you have not added the web server name into your DNS. You can add it in your Host File on your system or click on Add this list to your Local DNS if the Artica server is allowed to be a DNS server)     [Less]
Posted over 15 years ago by David Touzeau
Cette fonctionnalité est disponible avec Artica en version minimum 1.4.010702 à l'heure ou cet article est créé, cette version est toujours en nightly build, pour en bénéficier, activez la mise à jour des nightly builds ou bien faites ... [More] /usr/share/artica-postfix/bin/artica-update --upgrade-nightly Cet article à pour but de vous expliquer comment interconnecter 2 sites distants en VPN sans trop d'efforts. Avant de commencer, il faut s'assurer que les deux réseaux ne disposent pas de la même tranche d'adresses IP. Je prends l'exemple des LiveBox Pro qui proposent en dur des adresses en 192.168.1.x il faut que au moins un des deux sites ne dispose pas de cette tranche (par exemple 192.168.2.x). Dans le cas contraire, les postes ne pourront pas se voir. Pour ceux qui ont des LiveBox sagem, voici la procédure pour modifier les plages DHCP : http://www.jdl68160.com/informatique/modif_ip_lb_sagem.htm En dehors de cette préconisation, vous allez être en mesure d'interconnecter deux sites sans problèmes.Bien sur vous n'êtes pas limité à 2 sites, on peut reproduire cette manipulation sur 10/20/100 sites distants...Il faudra alors de toutes manières installer un Artica par site distant. D'autre part, cette procédure n'empêche pas un nomade/portable de se connecter en VPN via le client VPN OpenVPN en direct sur le site principal. Les photos d'écran ci-dessous sont en Anglais mais sachez que Artica propose aussi son panel en  français   A) Configurer le maître VPN. Sur un des deux sites vous allez en choisir un qui servira de "concentrateur / Fédérateur" des connexions VPN des sites distants. Une fois le serveur Artica installé, allez dans "Manage Your server", cliquez sur Système information à gauche et choisissez l'icône OPenVPN. Clickez sur le premier Icône OpenVPN server Parameters   J'ai entouré les options obligatoires : Activez le serveur VPN, Indiquez l'adresse ou le nom public du serveur de manière à permettre au site distant de retrouver son serveur sur Internet. Choisissez la carte réseau dans Allow VPN session To: de manière à faire traverser les session VPN vers le réseau local (dans le cas contraire les connexions s'arrêtent au serveur). Une fois cette opération effectuée, votre serveur VPN attends déjà les connexions. Identifiez vos sites distants sur le serveur Maître et récupérez le script de connexion : Cliquez sur l'îcone "Remote Sites"   Cliquez sur le bouton de gauche, Add a New remote Site Indiquez le nom de votre site Indiquez la tranche réseau utilisée sur le site distant. Une fois le site ajouté, vous allez le voir afficher dans la liste. Vous y verrez un lien "Download configuration File"   Lorsque vous cliquez dessus, une nouvelle fenêtre s'affiche et vous permettra de télécharger un fichier ZIP. Ce fichier ZIP contient l'ensemble des paramètres et des clefs de sécurité pour que les clients se connectent au serveur. Vous avez fait 90% du paramétrage !! Passons au site distant maintenant... Sur le serveur Artica du Site distant Allez sur le serveur Artica situé dans le réseau du site distant Cliquez cette fois-ci sur l'icône "Connect Your server"   Utilisez la section du bas afin de charger le fichier ZIP que vous avez récupéré du serveur sur le site principal. Une fois le fichier chargé, cliquez sur "refresh". Vous y verrez que le serveur à compris les paramètres du serveur principal et se connecte automatiquement. Vous pouvez charger plusieurs fichiers et ce serveur peut être client de plusieurs serveurs VPN.   Pour que les postes se voient entre-eux. Il faut vous assurer à la fois sur le site principale et sur le site distant que les serveurs VPN (client et maitre) soient les passerelles des différents réseaux ajoutés. Il faut ajoute une "route" des deux parties. Admettons par exemple: Mon serveur principal est en 192.168.1.x masque 255.255.255.0L'adresse interne du serveur Artica VPN est 192.168.1.105 Mon serveur sur le site distant est en 192.168.2.0 masque 255.255.255.0L'adresse interne de mon serveur Artica Cient VPN sur le site distant est 192.168.2.53 Sur mon site principal, sur la passerelle principale (livebox, router, DHCP..) je rajoute la route 192.168.2.0 255.255.255.0 gateway 192.168.1.105 Sur mon site secondaire, sur la passerelle principale (livebox, router, DHCP..) je rajoute la route 192.168.1.0 255.255.255.0 gateway 192.168.2.53 Dans les prochaines version,  je ferai en sorte que Artica comprenne la configuration résau VPN et la rajoute automatiquement à son service DHCP.           [Less]
Posted over 15 years ago by David Touzeau
This feature is available with artica 1.4.010317 version.It allow you to add a web service that allow users to :Change their settings according rights.Query the eMail quarantine areaQuery relatime emails events on the gateway for their accounts.Query ... [More] the backup area. Manage fetchmail rules.(screenshots available here)Each organization can have their own interface in the same way has others groupware systems.Go into your organizationSelect the Groupwares tab  Click on the "Add a Web service" IconSelect "Artica End-user Front-end" in the Service type dropdown list Define the first part of the web service name and select the available domain name.Select the addressClick on Add You don't need to fill Mysql/Application other informations. Your web server is added in the interface.You need now to add this entry in your DNS server. If you don't haveChange your /etc/hosts or c:\windows\system32\drivers\etc\hosts file and putipfoserver             nameofyour server    Once DNS/hosts file are changed, you can click on the arrow on the right side of your web site in order to go into. [Less]
Posted over 15 years ago by David Touzeau
On OpenSuse setup-suse install following packages : For artica base  : hal ,cron ,file ,hdparm ,less ,rdate ,rsync ,rsh ,openssh ,strace ,sysfsutils ,tcsh ,time ,eject ,glibc-locale ,pciutils , ,usbutils ,openldap2-client ,openldap2 ,openssl ... [More] ,bridge-utils ,openvpn ,libmcrypt ,php5-fastcgi ,php5-ldap , ,php5-mysql ,php5-imap , ,php5-pear ,php5-gd ,php5-posix ,php5-mbstring ,php5-mcrypt ,yast2-autofs ,nfs-client ,nfs-kernel-server ,apache2 ,lighttpd , mysql ,rrdtool ,rrdtool-devel ,perl-File-Tail ,perl-libwww-perl ,amavis ,perl-Convert-ASN1 ,perl-Convert-BinHex ,perl-Crypt-OpenSSL-RSA ,perl-IO-Multiplex ,perl-IO-stringy ,perl-ldap ,perl-Mail-DKIM ,perl-MailTools ,perl-MIME-tools ,perl-Unix-Syslog ,perl-Net-Server ,perl-SOAP-Lite ,perl-Net-IP ,perl-XML-Simple ,perl-DBI ,perl-DBD-mysql ,apache2-mod_perl ,perl-Apache-DBI ,perl-Tie-IxHash ,perl-Socket6 ,perl-IO-Socket-INET6 ,libmysqlclient-devel ,cyrus-sasl-saslauthd ,cyrus-sasl ,perl-Authen-SASL-Cyrus ,perl-Authen-SASL ,sudo ,gcc , ,make ,libexpat-devel ,libxml2-devel ,pcre-devel ,openldap2-devel,gdbm-devel ,krb5-devel ,libgssapi-devel ,cyrus-sasl-gssapi ,unixODBC-devel ,unixODBC ,php5-devel ,freetype2-devel ,t1lib-devel ,libpaper-devel ,libzip-devel ,aspell-devel ,libcurl-devel ,e2fsprogs-devel ,glibc-devel ,keyutils-devel ,krb5-devel ,libgcc ,libidn-devel ,libjpeg-devel ,libpng-devel ,libselinux-devel ,libsepol-devel ,libstdc++-devel ,xorg-x11-libX11-devel ,xorg-x11-libXau-devel ,xorg-x11-libXdmcp-devel ,xorg-x11-libXpm-devel ,net-snmp-devel ,openldap2-devel ,libopenssl-devel ,zlib-devel ,gd-devel ,sysstat ,GeoIP ,geoip-devel ,readline-devel ,tcp_wrappers ,stunnel , dhcp-server,apache,libapache2-mod-vhost-ldap ,ntp ,iproute ,libusb-devel ,libusb-compat-devel,perl-Inline ,libcdio ,libconfuse-devel ,curl ,sensors ,bzip2 ,unrar ,unzip ,unarj ,lha ,zoo ,htop ,telnet ,lsof ,dar ,preload ,nmap,pdns,pdns-backend-ldap,pdns-recursor,apache2-devel,openldap2-devel,libexpat-devel,freetype2-devel,libgcrypt-devel,gd-devel,gmp-devel,krb5-devel,libmcrypt-devel,mhash-devel,libmysqlclient-devel,ncurses-devel,pam-devel,pcre-devel,libpng-devel,aspell-devel,recode-devel,cyrus-sasl-devel,sqlite-devel,libopenssl-devel,t1lib-devel,libtidy-devel,libtool,tcpd-devel,libxml2-devel,libxslt-devel,re2c,unixODBC-devel,zlib-devel,chrpath,imap-devel,curl-devel,net-snmp-develFor Messaging :gd,wv,postfix,clamav,spamassassin,perl-BerkeleyDB,perl-Convert-UUlib,krb5-devel,libgssglue-devel,mailman,sendmail-devel,perl-razor-agents,razor-agents,perl-Crypt-SSLeay,perl-Net-SSLeay,perl-Convert-TNEF,perl-HTML-Parser,perl-Archive-Zip,free-ttf-fonts For File sharingnss_ldap, samba, samba-client, libsmbclient0, pam_ldap, pam_smb, nmap, cups-devel, gutenprint, gutenprint-devel, libjpeg-devel, libtiff-devel, e2fsprogs-devel, pam-devel   [Less]
Posted over 15 years ago by David Touzeau
If you have forgot the password to access to Artica front-end :Connect on SSH or on terminal on your system.The password is stored into the OpenLDAP server configuration file :  do cat /etc/ldap/slapd.conf |grep rootpw orcat /etc/openldap/slapd.conf |grep rootpw orgedit /etc/ldap/slapd.conf &orkedit /etc/openldap/slapd.conf &
Posted over 15 years ago by David Touzeau
This feature is available with artica version 1.3.120701It allow you to manage DNS system trough PowerDNS.It is useful to add  internal web sites by adding the web site domain into the DNS system.You need first to install PowerDNS trough the setup ... [More] Control Center. If it is installed, you can create a new widget that will give to you access to PowerDNS database.  The add a new host button will display you the necessary form to add entries in DNS system. [Less]