sigrok-cli

We're happy to announce the release of libsigrok 0.5.1. Tarballs are available from the Downloads page, as usual. This is a "minor" release that doesn't change or remove any existing public API functions, so all existing clients will continue to ... [More] work (without even the need to recompile). The following hardware is now (additionally) supported: Logic analyzers: DreamSourceLab DSLogic Basic/Plus, Hantek 4032L, IPDBG (ipdbg.org FPGA IP debugger), Meilhaus Logian-16L, Saleae Logic Pro 16, ZEROPLUS Logic Cube LAP-C (16128+) / LAP-16032U Oscilloscopes: Agilent MSO7034A, Hantek DSO-2250, Rigol DS4000 series, Siglent SDS1000/SDS2000 series Programmable power supplies: GW Instek GPD series, HP 6631B/66332A/6633B/6634B, Korad KD3005P, RDTech DPS/DPH series, Rigol DP711/DP712, RND KA3005P, Tenma 72-2540 Electronic loads: ZKETECH EBD-USB Multimeters: EEVblog 121GW, Fluke 45, HP 3478A, MASTECH MS8250D, Metex M-3860M, PeakTech 4390A, SparkFun 70C, Victor DMMs with Mini-USB connector, Voltcraft VC-96 Pretty much every existing hardware driver has also received numerous fixes and improvements. There have also been quite a few bugfixes, documentation fixes, portability fixes, build system improvements, performance improvements, and so on. There are some new API calls now, you can read up all the details in the API docs. See the NEWS file for a much more detailed list of changes, or browse the git history for even more details.   [Less]

We're happy to announce the release of libsigrok 0.5.1. Tarballs are available from the Downloads page, as usual. This is a "minor" release that doesn't change or remove any existing public API functions, so all existing clients will continue to ... [More] work (without even the need to recompile). The following hardware is now (additionally) supported: Logic analyzers: DreamSourceLab DSLogic Basic/Plus, Hantek 4032L, IPDBG (ipdbg.org FPGA IP debugger), Meilhaus Logian-16L, Saleae Logic Pro 16, ZEROPLUS Logic Cube LAP-C (16128+) / LAP-16032U Oscilloscopes: Agilent MSO7034A, Hantek DSO-2250, Rigol DS4000 series, Siglent SDS1000/SDS2000 series Programmable power supplies: GW Instek GPD series, HP 6631B/66332A/6633B/6634B, Korad KD3005P, RDTech DPS/DPH series, Rigol DP711/DP712, RND KA3005P, Tenma 72-2540 Electronic loads: ZKETECH EBD-USB Multimeters: EEVblog 121GW, Fluke 45, HP 3478A, MASTECH MS8250D, Metex M-3860M, PeakTech 4390A, SparkFun 70C, Victor DMMs with Mini-USB connector, Voltcraft VC-96 Pretty much every existing hardware driver has also received numerous fixes and improvements. There have also been quite a few bugfixes, documentation fixes, portability fixes, build system improvements, performance improvements, and so on. There are some new API calls now, you can read up all the details in the API docs. See the NEWS file for a much more detailed list of changes, or browse the git history for even more details.   [Less]

We're happy to announce the release of libsigrok 0.5.1. Tarballs are available from the Downloads page, as usual. This is a "minor" release that doesn't change or remove any existing public API functions, so all existing clients will continue to ... [More] work (without even the need to recompile). The following hardware is now (additionally) supported: Logic analyzers: DreamSourceLab DSLogic Basic/Plus, Hantek 4032L, IPDBG (ipdbg.org FPGA IP debugger), Meilhaus Logian-16L, Saleae Logic Pro 16, ZEROPLUS Logic Cube LAP-C (16128+) / LAP-16032U Oscilloscopes: Agilent MSO7034A, Hantek DSO-2250, Rigol DS4000 series, Siglent SDS1000/SDS2000 series Programmable power supplies: GW Instek GPD series, HP 6631B/66332A/6633B/6634B, Korad KD3005P, RDTech DPS/DPH series, Rigol DP711/DP712, RND KA3005P, Tenma 72-2540 Electronic loads: ZKETECH EBD-USB Multimeters: EEVblog 121GW, Fluke 45, HP 3478A, MASTECH MS8250D, Metex M-3860M, PeakTech 4390A, SparkFun 70C, Victor DMMs with Mini-USB connector, Voltcraft VC-96 Pretty much every existing hardware driver has also received numerous fixes and improvements. There have also been quite a few bugfixes, documentation fixes, portability fixes, build system improvements, performance improvements, and so on. There are some new API calls now, you can read up all the details in the API docs. See the NEWS file for a much more detailed list of changes, or browse the git history for even more details.   [Less]

We're happy to announce the release of libsigrokdecode 0.5.2. Tarballs are available from the Downloads page, as usual. This is a "minor" release that doesn't change or remove any existing public API functions, so all existing clients will continue ... [More] to work (without even the need to recompile). The following new protocol decoders are now available: mcs48: Intel MCS-48 external memory access protocol st7735: Sitronix ST7735 TFT controller protocol atsha204a: Microchip ATSHA204A CryptoAuthentication device cfp: 100 Gigabit C form-factor pluggable (CFP) protocol jtag_ejtag: MIPS EJTAG protocol swim: STM8 Single Wire Interface Module (SWIM) protocol cec: HDMI Consumer Electronics Control (CEC) protocol miller: Miller encoding protocol ook: On-off keying protocol ook_oregon: Oregon Scientific weather sensor protocol ook_vis: OOK visualisation in various formats In total, we now support 93 different protocol decoders. If you're working on additional PDs, please send patches our way! See the NEWS file for a much more detailed list of changes, or browse the git history for even more details. [Less]

We're happy to announce the release of libsigrokdecode 0.5.2. Tarballs are available from the Downloads page, as usual. This is a "minor" release that doesn't change or remove any existing public API functions, so all existing clients will continue ... [More] to work (without even the need to recompile). The following new protocol decoders are now available: mcs48: Intel MCS-48 external memory access protocol st7735: Sitronix ST7735 TFT controller protocol atsha204a: Microchip ATSHA204A CryptoAuthentication device cfp: 100 Gigabit C form-factor pluggable (CFP) protocol jtag_ejtag: MIPS EJTAG protocol swim: STM8 Single Wire Interface Module (SWIM) protocol cec: HDMI Consumer Electronics Control (CEC) protocol miller: Miller encoding protocol ook: On-off keying protocol ook_oregon: Oregon Scientific weather sensor protocol ook_vis: OOK visualisation in various formats In total, we now support 93 different protocol decoders. If you're working on additional PDs, please send patches our way! See the NEWS file for a much more detailed list of changes, or browse the git history for even more details. [Less]

We're happy to announce the release of libsigrokdecode 0.5.2. Tarballs are available from the Downloads page, as usual. This is a "minor" release that doesn't change or remove any existing public API functions, so all existing clients will continue ... [More] to work (without even the need to recompile). The following new protocol decoders are now available: mcs48: Intel MCS-48 external memory access protocol st7735: Sitronix ST7735 TFT controller protocol atsha204a: Microchip ATSHA204A CryptoAuthentication device cfp: 100 Gigabit C form-factor pluggable (CFP) protocol jtag_ejtag: MIPS EJTAG protocol swim: STM8 Single Wire Interface Module (SWIM) protocol cec: HDMI Consumer Electronics Control (CEC) protocol miller: Miller encoding protocol ook: On-off keying protocol ook_oregon: Oregon Scientific weather sensor protocol ook_vis: OOK visualisation in various formats In total, we now support 93 different protocol decoders. If you're working on additional PDs, please send patches our way! See the NEWS file for a much more detailed list of changes, or browse the git history for even more details. [Less]

lisigrokdecode has recently gained support for yet another protocol decoder: sda2506. This PD decodes the Siemens SDA 2506-5 serial nonvolatile 1-Kbit EEPROM protocol. This is a non-standard EEPROM (i.e., not one of the common I²C based 24xx series ... [More] EEPROMs). As usual there are a few example files in the sigrok-dumps repo and some test-cases in sigrok-test. The decoder was contributed by Max Weller, thanks a lot!   [Less]

lisigrokdecode has recently gained support for yet another protocol decoder: sda2506. This PD decodes the Siemens SDA 2506-5 serial nonvolatile 1-Kbit EEPROM protocol. This is a non-standard EEPROM (i.e., not one of the common I²C based 24xx series ... [More] EEPROMs). As usual there are a few example files in the sigrok-dumps repo and some test-cases in sigrok-test. The decoder was contributed by Max Weller, thanks a lot!   [Less]

lisigrokdecode has recently gained support for yet another protocol decoder: sda2506. This PD decodes the Siemens SDA 2506-5 serial nonvolatile 1-Kbit EEPROM protocol. This is a non-standard EEPROM (i.e., not one of the common I²C based 24xx series ... [More] EEPROMs). As usual there are a few example files in the sigrok-dumps repo and some test-cases in sigrok-test. The decoder was contributed by Max Weller, thanks a lot!   [Less]

libsigrok now supports the Hantek 4032L logic analyzer hardware. This is a USB-based, 32-channel logic analyzer with a samplerate of up to 400MHz (150MHz bandwidth according to vendor), with 2Gbit internal memory (DDR2 RAM, 64Msamples x 32). It ... [More] supports configuring two different voltage threshold ranges for the two sets of channels (A0-A15, B0-B15), between -6V and 6V. It also supports an external clock mode. Teardown photos of the device are available in the sigrok wiki, as usual. The driver was contributed by Andreas Zschunke, with various fixes and improvements by Andrej Valek, thanks a lot!     [Less]