1
I Use This!
Inactive

News

Analyzed 3 days ago. based on code collected 4 days ago.
Posted about 16 years ago
This is a relatively major release. The main features are more accurate track display, and the new Road Type Inspector. Changes since 0.2.4: Proper (mostly) display of interpolated track sections, as used most prominently in the built-in Canyon ... [More] Race Track. Proper display when abutting track segments don’t line up properly. New Pan Camera (hand) tool. Implemented Road Type List and Road Type Inspector. Track segments of zero length are now marked with a red dot (if the Control Line is visible). Menus cleaned up: certain unimplemented commands removed, others renamed and merged. The grid now displays properly in South and East views. A bug was fixed which caused memory used by a document not to be recovered when the document was closed. Modifier keys used to control the camera have been altered. Known problems: Switching from 3D Camera view to any other view with the Orbit Camera (eye) tool selected will switch to the Pan Camera tool, as the Orbit Camera tool is only relevant in 3D Camera view. Switching back to 3D view should restore the original tool selection, but currently does not. Camera control isn’t very good. The Respawn Location check box in the Road Type Inspector should be disabled, but isn’t. Drivable track boundaries are displayed incorrectly in some instances. AI track boundaries are not displayed at all. It is possible to have two separate windows open for the same track, if (and only if) that track is the only track in a given plug-in. The user interface has become quite messy in parts. [Less]
Posted about 16 years ago
This is a relatively major release. The main features are more accurate track display, and the new Road Type Inspector. Changes since 0.2.4: Proper (mostly) display of interpolated track sections, as used most prominently in the built-in Canyon ... [More] Race Track. Proper display when abutting track segments don’t line up properly. New Pan Camera (hand) tool. Implemented Road Type List and Road Type Inspector. Track segments of zero length are now marked with a red dot (if the Control Line is visible). Menus cleaned up: certain unimplemented commands removed, others renamed and merged. The grid now displays properly in South and East views. A bug was fixed which caused memory used by a document not to be recovered when the document was closed. Modifier keys used to control the camera have been altered. Known problems: Switching from 3D Camera view to any other view with the Orbit Camera (eye) tool selected will switch to the Pan Camera tool, as the Orbit Camera tool is only relevant in 3D Camera view. Switching back to 3D view should restore the original tool selection, but currently does not. Camera control isn’t very good. The Respawn Location check box in the Road Type Inspector should be disabled, but isn’t. Drivable track boundaries are displayed incorrectly in some instances. AI track boundaries are not displayed at all. It is possible to have two separate windows open for the same track, if (and only if) that track is the only track in a given plug-in. The user interface has become quite messy in parts. [Less]
Posted about 16 years ago
This release of Plug-in Splitter addresses a specific problem with the extraction of small plug-ins. In particular, attempting to extract a plug-in would occasionaly result in the message “Unexpected exception in FileExtractor worker thread ID 0: *** ... [More] -[NSConcreteData writeToFile:options:error:]: nil file argument”. It is believed that this error was most likely to occur on single-core systems. Changes from 1.0.3: Fixed an intermittent problem with extraction from small files. Several small user interface tweaks. [Less]
Posted about 16 years ago
This release of Plug-in Splitter addresses a specific problem with the extraction of small plug-ins. In particular, attempting to extract a plug-in would occasionaly result in the message “Unexpected exception in FileExtractor worker thread ID 0: *** ... [More] -[NSConcreteData writeToFile:options:error:]: nil file argument”. It is believed that this error was most likely to occur on single-core systems. Changes from 1.0.3: Fixed an intermittent problem with extraction from small files. Several small user interface tweaks. [Less]
Posted about 16 years ago
This release adds several display enhancements. Changes since 0.2.3: More accurate display of road profiles. The “minTrack” and “maxTrack” lines are shown. These define the area that the AI considers to be drivable road. Control points for the AI racing line are now shown as yellow dots. Adjusted display colours.
Posted about 16 years ago
This release adds several display enhancements. Changes since 0.2.3: More accurate display of road profiles. The “minTrack” and “maxTrack” lines are shown. These define the area that the AI considers to be drivable road. Control points for the AI racing line are now shown as yellow dots. Adjusted display colours.
Posted about 16 years ago
This is a maintenance update of Plug-in Splitter. It includes several minor bug fixes and reliability enhancements made while working on related tools with a common source base. It also adds user interface features to maintain parity with Map Viewer. ... [More] Various bug fixes. Added option to disable automatic updates. Added “Extract Built-in Data” menu item. [Less]
Posted about 16 years ago
This is a maintenance update of Plug-in Splitter. It includes several minor bug fixes and reliability enhancements made while working on related tools with a common source base. It also adds user interface features to maintain parity with Map Viewer. ... [More] Various bug fixes. Added option to disable automatic updates. Added “Extract Built-in Data” menu item. [Less]
Posted about 16 years ago
This is a bug-fix release which makes Map Viewer work on Intel Macs. If you can open maps in Map Viewer, and have version 0.2, there is no need to install this update. Changes since 0.2: Now works on Intel Macs. Changes since 0.1: The width and ... [More] profile of the road is now shown. The grid can be shown in miles and kilometres. By default, the setting is based on Redline’s preferences. Added “Open Built-in Maps” menu item. Numerous internal changes. Several small user interface tweaks. [Less]
Posted about 16 years ago
This is a bug-fix release which makes Map Viewer work on Intel Macs. If you can open maps in Map Viewer, and have version 0.2, there is no need to install this update. Changes since 0.2: Now works on Intel Macs. Changes since 0.1: The width and ... [More] profile of the road is now shown. The grid can be shown in miles and kilometres. By default, the setting is based on Redline’s preferences. Added “Open Built-in Maps” menu item. Numerous internal changes. Several small user interface tweaks. [Less]