Synchrophasor Stream Splitter

This is the official release of the Synchrophasor Stream Splitter service. Note: This application requires .NET 4.6 to be installed. Updated release to version 1.0.10 to include: Updated to latest GSF, v2.1.154, to include recent bug fixes Added ... [More] customizable data monitor interval by adding connection string parameter "dataMonitorInterval" to a specified number of milliseconds Updated release to version 1.0.9 to include: Latest GSF libraries which include stability fixes Migration to .NET 4.6 for speed enhancements Updated release to version 1.0.8 to include: Improved error handling and automatic connection recovery when using reverse initiated TCP proxies. Updated GSF libraries to latest version. Updated release to version 1.0.7 to include: Added new check boxes for easier support of listening TCP connections for both source and proxy destinations. This allows synchrophasor traffic to cross security perimeters from high-to-low even when traffic normally is initiated in the other direction. Updated GSF libraries to latest version. Updated release to version 1.0.6 to include: Fixed "save-as" button to operate as expected Updated release to version 1.0.5 to include: Fixed issue with device access ID assignment Updated release to version 1.0.4 to include: Latest GSF updates Updated release to version 1.0.3 to include: Latest GSF updates Auto-start of publication channel (not dependent on config frame reception) Upgradable install package with .NET 4.5 detection Updated release to version 1.0.2 to include: Option for IEEE C37.118 to trust parsed byte counts over header length "Reconnect" button changed to "Connect To" with dialog for alternate server connection Transparent panel now only visible when mouse is over delete tool bar button for current selection emphasis. Updated release to version 1.0.1 to include fix for IEEE 1344 streams. [Less]

This is the official release of the Synchrophasor Stream Splitter service. Note: This application requires .NET 4.6 to be installed. Updated release to version 1.0.10 to include: Updated to latest GSF, v2.1.154, to include recent bug fixes Added ... [More] customizable data monitor interval by adding connection string parameter "dataMonitorInterval" to a specified number of milliseconds Updated release to version 1.0.9 to include: Latest GSF libraries which include stability fixes Migration to .NET 4.6 for speed enhancements Updated release to version 1.0.8 to include: Improved error handling and automatic connection recovery when using reverse initiated TCP proxies. Updated GSF libraries to latest version. Updated release to version 1.0.7 to include: Added new check boxes for easier support of listening TCP connections for both source and proxy destinations. This allows synchrophasor traffic to cross security perimeters from high-to-low even when traffic normally is initiated in the other direction. Updated GSF libraries to latest version. Updated release to version 1.0.6 to include: Fixed "save-as" button to operate as expected Updated release to version 1.0.5 to include: Fixed issue with device access ID assignment Updated release to version 1.0.4 to include: Latest GSF updates Updated release to version 1.0.3 to include: Latest GSF updates Auto-start of publication channel (not dependent on config frame reception) Upgradable install package with .NET 4.5 detection Updated release to version 1.0.2 to include: Option for IEEE C37.118 to trust parsed byte counts over header length "Reconnect" button changed to "Connect To" with dialog for alternate server connection Transparent panel now only visible when mouse is over delete tool bar button for current selection emphasis. Updated release to version 1.0.1 to include fix for IEEE 1344 streams. [Less]

(1) Updated to latest GSF, v2.1.154, to include recent bug fixes (2) Updated version to 1.0.10

(1) Updated to latest GSF, v2.1.154, to include recent bug fixes (2) Updated version to 1.0.10

Added customizable data monitor interval by adding connection string parameter "dataMonitorInterval" to a specified number of milliseconds.

Added customizable data monitor interval by adding connection string parameter "dataMonitorInterval" to a specified number of milliseconds.

Project DescriptionCreates multiple streams from a single synchrophasor stream source.This service based application allows you to take one incoming stream of synchrophasor data (e.g., from a substation with limited bandwidth) and redistribute the ... [More] stream as many times as needed. All common synchrophasor protocols are supported (e.g., IEEE C37.118, IEC 61850-90-5, IEEE 1344, F-NET, SEL Fast Message, Macrodyne and BPA PDCstream) . This tool does not disaggregate streams into points - it resends exactly what was received. Manager and console applications can be run remotely - active configuration can be downloaded, edited and uploaded from management tool. Configuration is stored as an XML file. Full support for incoming and outgoing UDP, TCP, Multicast, IPv6, and IPv4 in all combinations.For TCP proxy point, configuration frames are cached and sent to clients upon request. For UDP rebroadcasts, configuration frames will automatically be sent once per minute unless source connection is already doing this. Using multiple instances of this service can allow you to safely traverse security zones with synchrophasor data by making sure connections are initiated from the higher security zone regardless of the direction of data flow. Note: this application requires .NET 4.6 - make sure this is installed before setup. Synchrophasor Stream Splitter Tags:data concentrator stream FNET GPA Grid Protection Alliance IEEE 1344 IEEE C37.118 IEC 61850-90-5 Macrodyne PDC Phasor PMU protocol real-time SEL Fast Message smartgrid sockets streaming data Synchrophasor UDP rebroadcast TCP proxy point [Less]

Project DescriptionCreates multiple streams from a single synchrophasor stream source.This service based application allows you to take one incoming stream of synchrophasor data (e.g., from a substation with limited bandwidth) and redistribute the ... [More] stream as many times as needed. All common synchrophasor protocols are supported (e.g., IEEE C37.118, IEC 61850-90-5, IEEE 1344, F-NET, SEL Fast Message, Macrodyne and BPA PDCstream) . This tool does not disaggregate streams into points - it resends exactly what was received. Manager and console applications can be run remotely - active configuration can be downloaded, edited and uploaded from management tool. Configuration is stored as an XML file. Full support for incoming and outgoing UDP, TCP, Multicast, IPv6, and IPv4 in all combinations.For TCP proxy point, configuration frames are cached and sent to clients upon request. For UDP rebroadcasts, configuration frames will automatically be sent once per minute unless source connection is already doing this. Using multiple instances of this service can allow you to safely traverse security zones with synchrophasor data by making sure connections are initiated from the higher security zone regardless of the direction of data flow. Note: this application requires .NET 4.6 - make sure this is installed before setup. Synchrophasor Stream Splitter Tags:data concentrator stream FNET GPA Grid Protection Alliance IEEE 1344 IEEE C37.118 IEC 61850-90-5 Macrodyne PDC Phasor PMU protocol real-time SEL Fast Message smartgrid sockets streaming data Synchrophasor UDP rebroadcast TCP proxy point [Less]

This is the official release of the Synchrophasor Stream Splitter service. Note: This application requires .NET 4.6 to be installed. Updated release to version 1.0.9 to include: Latest GSF libraries which include stability fixes Migration to .NET ... [More] 4.6 for speed enhancements Updated release to version 1.0.8 to include: Improved error handling and automatic connection recovery when using reverse initiated TCP proxies. Updated GSF libraries to latest version. Updated release to version 1.0.7 to include: Added new check boxes for easier support of listening TCP connections for both source and proxy destinations. This allows synchrophasor traffic to cross security perimeters from high-to-low even when traffic normally is initiated in the other direction. Updated GSF libraries to latest version. Updated release to version 1.0.6 to include: Fixed "save-as" button to operate as expected Updated release to version 1.0.5 to include: Fixed issue with device access ID assignment Updated release to version 1.0.4 to include: Latest GSF updates Updated release to version 1.0.3 to include: Latest GSF updates Auto-start of publication channel (not dependent on config frame reception) Upgradable install package with .NET 4.5 detection Updated release to version 1.0.2 to include: Option for IEEE C37.118 to trust parsed byte counts over header length "Reconnect" button changed to "Connect To" with dialog for alternate server connection Transparent panel now only visible when mouse is over delete tool bar button for current selection emphasis. Updated release to version 1.0.1 to include fix for IEEE 1344 streams. [Less]

This is the official release of the Synchrophasor Stream Splitter service. Note: This application requires .NET 4.6 to be installed. Updated release to version 1.0.9 to include: Latest GSF libraries which include stability fixes Migration to .NET ... [More] 4.6 for speed enhancements Updated release to version 1.0.8 to include: Improved error handling and automatic connection recovery when using reverse initiated TCP proxies. Updated GSF libraries to latest version. Updated release to version 1.0.7 to include: Added new check boxes for easier support of listening TCP connections for both source and proxy destinations. This allows synchrophasor traffic to cross security perimeters from high-to-low even when traffic normally is initiated in the other direction. Updated GSF libraries to latest version. Updated release to version 1.0.6 to include: Fixed "save-as" button to operate as expected Updated release to version 1.0.5 to include: Fixed issue with device access ID assignment Updated release to version 1.0.4 to include: Latest GSF updates Updated release to version 1.0.3 to include: Latest GSF updates Auto-start of publication channel (not dependent on config frame reception) Upgradable install package with .NET 4.5 detection Updated release to version 1.0.2 to include: Option for IEEE C37.118 to trust parsed byte counts over header length "Reconnect" button changed to "Connect To" with dialog for alternate server connection Transparent panel now only visible when mouse is over delete tool bar button for current selection emphasis. Updated release to version 1.0.1 to include fix for IEEE 1344 streams. [Less]