OpenWrt

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: @t3l3m4k0:    That's exactly what I'm looking for.  Please email me: [email protected].   I just want to modify imagetag to load firmware images from the stock ... [More] web interface, which is a lot more likely to happen if I can see what they are doing.Now as we're all saying, if only broadcom released sources too....@florian:   Does any hex editing need to be done on them for them to use recognize the switch/ethernet?  I got a message in that respect (sorry it was a while ago, and my stock CFE is working fine so it's low on the todo list). [Less]

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: You can find several CFE binaries for the 4 most popular flavors of bcm63xx here : http://downloads.openwrt.org/people/florian/cfe/

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: I make a mistake in last post, i have "sources" from manufacturer this includes:* sources from opensources* and binaries from broadcom specifics.CFE files included in "sources" are of course binary files, also ADSL drivers are binary files.

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: Dear Brother:                    Who can offer me a source code of CFE for BCM6348 or BCM6358 ? Email:[email protected] very much.

Topic: Kamikaze 8.09 Message: inzbill26 wrote:hello! I just begin to use Openwrt on a wireless router (linksys) and I want to know if it is possible to modify the transmission power of my device using kamikaze 7.09. Please help me Are you sure that the section called News, and the topic called 8.09 is the right place to ask this question?

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: cshore wrote:I unfortunately have a board for which the manufacturer doesn't provide source code to end users (anyone got source for a ComTrend CT-5261 or similar ... [More] board?), so I haven't been able to do that with my own board. as i can see at http://wiki.openwrt.org/OpenWrtDocs/Har … highlight=(CategoryBCM63xx) your board is same as mine (Comtrend 536), but without Mini PCI slot soldered.I have stock firmware sources for it (about 100MB each). Any part are of your interest? [Less]

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: Dan:1. Yes, for before; after is something that we'll have to work on with Jo on the LuCI stuff; 2. I just sent you a PM to get your correct email address for the firmware.marc.

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: Hello everybody.I have got Linksys WAG 54gs, based on Broadcom 6348. Current firmware seems to be to simple and I really lack couple features, namely ssh and dnsmasq.I ... [More] use linux on daily basis, know how to use make  and can code in C a little bit. So question is -- is there any chance to get this router run openwrt? [Less]

Topic: New Broadcom BCM63xx codebase with GPL'd Ethernet and USB support Message: @marca56:1) Okay, when you say load via the web interface do you mean after reflashing with kamikaze or before?2) Since you likely mean before because you want to add ... [More] kamikaze: Can you can the manufacturer's firmware source code?  I could read that and see if they include their web interface checksumming so that I can do the right thing in imagetag.I unfortunately have a board for which the manufacturer doesn't provide source code to end users (anyone got source for a ComTrend CT-5261 or similar board?), so I haven't been able to do that with my own board. [Less]

Topic: Kamikaze 8.09 Message: nbd wrote:SDK, Image Builder are compiling at the moment ...About b43: If you want to help testing, compile a current trunk. It uses Linux 2.6.28 and a recent version of b43, which is reported to be much more stable ... [More] than the old 2.6.25 based version. Hi,Is there a location I can download the 8.09 SDK7.09 SDK is here.. http://downloads.openwrt.org/kamikaze/7 … m47xx-2.6/8.09 SDK is NOT here ?? http://downloads.openwrt.org/kamikaze/8.09/brcm47xx/Thanks [Less]